If you want to keep your home warm, it is best to insulate your ground floor. In general, you only have to insulate your ground floor. This means that the upper floors do not require insulation.  


However, before you choose to insulate your floor with spray foam insulation Riverside CA, there are several things you have to consider. Here are some of them: 

What Forms of Floor Do You Have? 

Typically, almost every home has a solid concrete ground floor. This is particularly true for newly constructed homes. You can insulate a solid concrete whenever you have to replace the flooring of your house. However, you can also simply install rigid insulation on top of it.  

Older houses probably have suspended timber floors. You likely have a suspended timber floor if you’ve got ventilation bricks or air bricks on the exterior walls of your home.  

Keep in mind that you shouldn’t block up air brick in the walls. They’re required to help ventilate the area under the floor and prevent the floorboards from rotting.  

If you’ve got a cellar or basement underneath your home, try to go there and take a look to see what kind of floor you’ve got. You’ll possibly be able to find wooden joists and the undersides of the floorboards if the floor is a suspended wooden floor.  

You’ll have to lift a corner of the underlay and carpet to check your floor if you do not have access to space beneath your home.  

You can insulate timber floors by lifting the boards and placing mineral wool insulation. you can utilize netting between the joists to support the insulation. Every year, you can save more than $40 if you insulate under the floorboards on your ground floor.  

Should You Hire an Expert? 

Keep in mind that not every house insulation work has to be done by an expert. You might save a lot of money if you do the job yourself. This is particularly true if you have the skills and tools required.  

To lower draughts, you can easily seal the gaps between skirting boards and floors yourself. You can use a tube of sealant that you can purchase from any home improvement store 

If you’ve got an unheated basement space or cellar underneath that you can access, it is very simple to insulate your timber floor. However, you first have to examine if the joists that supports the floorboards are in excellent shape and do not show any indications of dry or wet rot.  

You can fit insulation in between the joists if they are fine. If possible, you should hold it in place using netting. Whenever you put back the floorboards, you should try to seal up any gaps around and between them using the tube of sealant you purchased.  

Carpets and rugs on the floor will also help your feet to feel warmer. This might help you decide not to put the heating on much. This will save you a little more on your utility bills.